Results for rosco litepad loop draw string pouch
The Rosco LitePad Loop Draw String Pouch is a spare or replacement drawstring carry pouch for the Rosco LitePad Loop.
Click For Info
This battery accessory allows for the attachment of any V-Mount style battery (sold separately) to the bottom of the LitePad Loop Mounting Assembly. Please note: The Rosco Litepad Loop 4\" L-Bracket is required to use this part.
Click For Info
A set of 4 spare or replacement 4 inch rods supplied as standard with the Rosco LitePad Loop.
Click For Info
The Rosco LitePad Loop Light Masks offer a creative solution for altering the shape of the light as seen in a person\'s eye. Eye lights are an important part of any close up shot, and the Light Masks give you a great way to make them unique. The kit contains 9 masks: Circles, Slits, Lines, Stars,...
Click For Info
The 4\" L-Bracket positions the LitePad Loop further away from the camera than the standard 2in L-Bracket allows. This is helpful for longer lenses. This is the substitute for the standard Litepad Loop 2\" L-Bracket and adds 2 inches of distance between Loop and camera than the standard setup.
Click For Info
The 8\" Rods allow the LitePad Loop Sled to be positioned further away from the camera. This is helpful for longer lenses or cameras. This is the substitute for the standard Litepad Loop 2\" L-Bracket and adds 2 inches of distance between Loop and camera than the standard setup.
Click For Info
For more creative lighting options, Rosco offers the Colour Filter Pack designed to fit on the LitePad Loop. The Colour Filter Pack includes filters for warming the colour temperature (CTO Filters), Minusgreen, and Cosmetic filters, perfect for enhancing flesh tones. The pack contains: 8 Filters:...
Click For Info
The Rosco AA Battery Kit has everything you\'ll need to attach the AA Battery Holder (batteries not included) to the bottom of the LitePad Loop Mounting Assembly. NOTE: The 4\" L-Bracket is required to use this part.
Click For Info
This accessory allows for the LitePad Loop to attach to the LitePad Swivel Arm and then to a light stand (both sold separately). The magnets on the Loop attach to the Light Stand Plate and then the 1/4 - 20 Bolt on the back attaches to the Swivel Arm.
Click For Info
This accessory allows for the attachment of any Anton/Bauer battery (sold separately) to the bottom of the LitePad Loop Mounting Assembly. NOTE: The 4\" L-Bracket is required to use this part.
Click For Info
The Rosco LitePad AA Battery Holder can power any LitePad up to 12\"x12\" in size. The Rosco LitePad AA Battery Holder accepts eight AA batteries (not included).
Click For Info
The Rosco LitePad HO90 Everywhere Lighting Kit is the only kit in the LitePad line that contains LitePad HO units and a mixture of both Daylight and Tungsten colour temperatures. This kit was designed to fill the needs of those who still need the extremely thin profile and light weight features...
Click For Info
The Rosco LitePad Axiom Battery Holder Bracket Attachment (for the AA Battery Holder) allows the LitePad AA Battery Holder to be attached directly to any of the LitePad Axiom mounting brackets (Works with Axiom 1/4-20, baby pin, 5/8th receiver and wall plate bracket).
Click For Info
The Rosco LitePad Axiom 5/8 Receiver Bracket has a 5/8th Pin (Baby Pin) which allows LitePad to be attached to any device with a 5/8th (Baby) male pin, such as a scissor clamp. The maximum load capacity is 20lbs (9kg).
Click For Info
The Rosco LitePad Axiom 1/4 - 20 Bracket has a 1/4 - 20 bolt which allows LitePad to be attached to any device with a 1/4 - 20 female receiver. Maximum load capacity is 20lbs.
Click For Info
The Rosco LitePad Axiom Baby Pin Bracket has a Baby Pin (5/8th Pin) which allows a LitePad to be attached to any device with a Baby Pin female receiver. Maximum load capacity is 20lbs.
Click For Info
The Rosco LitePad 1/4 - 20 Baby (5/8) Pin adapter allows for LitePad\'s 1/4-20 mounting brackets to be attached to any Baby Pin (5/8th) receiver (eg C-Stand).
Click For Info
The Rosco LitePad Cold Shoe Attachment (1/4-20 male) allows the LitePad to be attached to the cold shoe of almost any still photography camera (additional mounting hardware required).
Click For Info
The Rosco LitePad 76mm Mounting Bracket will hold any 3\" Circle, 3\"x3\", 3\"x6\" and 3\"x12\" LitePad HO+ and with the rear DL. A 1/4 inch bolt you can also attach it to other objects such as a stand for greater flexibility.
Click For Info
The Rosco LitePad 152mm Mounting Bracket will hold any 3\"x6\" or 6\"x6\" LitePad HO+ and with the rear DL. A 1/4\" bolt you can also attach it to other objects such as a stand for greater flexibility.
Click For Info
The Rosco LitePad 610mm Mounting Bracket will hold any 24\"x24\" LitePad HO+ and using the rear DL. A 1/4\" bolt you can also attach it to other objects such as a stand for greater flexibility.
Click For Info
The Rosco LitePad 305mm Mounting Bracket will hold any 6\"x12\", 12\"x12\" or 12\" Circle LitePad HO+ and using the rear DL. A 1/4\" bolt you can also attach it to other objects such as a stand for greater flexibility.
Click For Info
The Rosco LitePad Axiom Wall Plate Bracket has a wall plate which allows a LitePad to be attached or screwed onto almost any surface. The maximum load capacity is 20lbs.
Click For Info
The Rosco LitePad Y-Splitter allows for more than one LitePad to be plugged into a power supply. Be sure the maximum amperage of the power supply is not exceeded when combining LitePads.
Click For Info
The Rosco LitePad Extension Cable enables the LitePad to be placed up to 3m farther away from the transformer.
Click For Info
The Rosco LitePad 4-Pin Adapter Cable will enable the LitePad to plug directly into any power supply with a 4-Pin (12VDC) XLR connector. The connections are a female 2.1x5.5mm barrel to male 4-pin XLR and the maximum load is 12v DC 5 Amps.
Click For Info
The Rosco LitePad Anton/Bauer Adapter will enable the LitePad to plug directly into any power supply with an Anton/Bauer (12VDC) connector. The connections are a female 2.1mmx5.5mm barrel to male Anton/Bauer and the maximum load is 12v DC 5Amps.
Click For Info
The Rosco LitePad Single Fader Dimmer is a compact thumb dimmer that allows the smooth dimming of any standard size LitePad with no change in the colour temperature. Maximum load is 4 amps (48 watts) and input/output is 12v DC.
Click For Info
The Rosco LitePad\'s 10ft Extension Cable enables the LitePad to be placed farther away from the transformer.
Click For Info
The Rosco LitePad 3 Amp Transformer is designed to work with the 3\"x12\", 6\"x12\", 12\"x12\" and 12\" Circle LitePad DL, HO+ and Axiom.
Click For Info
The Rosco LitePad 5 Amp Transformer is designed to work with the 24\"x24\" LitePad HO+ and Axiom.
Click For Info
This compact, lightweight Light Stand can hold any Rosco LitePad up to 12\"x12\" with the proper mounting attachment.
Click For Info
The Rosco LitePad Eggcrate is designed to give a more directional source of light (approximately 165 degrees to 127 degrees spread) and prevent spill off the sides of LitePads. It is available in a choice of 5 sizes.
Click For Info
The Rosco LitePad Eggcrate is designed to give a more directional source of light (approximately 165 degrees to 127 degrees spread) and prevent spill off the sides of LitePads. It is available in a choice of 5 sizes.
Click For Info
The Rosco LitePad Swivel Arm is a ball-and-socket construction that allows for positioning of all LitePads except the 24\"x24\" model.
Click For Info
The Rosco LitePad 8inch Snake Arm is a flexible arm designed to allow exact positioning of the smaller sized LitePads (maximum load 865g).
Click For Info
The Rosco LitePad Eggcrate is designed to give a more directional source of light (approximately 165 degrees to 127 degrees spread) and prevent spill off the sides of LitePads. It is available in a choice of 5 sizes.
Click For Info
The Rosco LitePad Eggcrate is designed to give a more directional source of light (approximately 165 degrees to 127 degrees spread) and prevent spill off the sides of LitePads. It is available in a choice of 5 sizes.
Click For Info
The Rosco LitePad Eggcrate is designed to give a more directional source of light (approximately 165 degrees to 127 degrees spread) and prevent spill off the sides of LitePads. It is available in a choice of 5 sizes.
Click For Info
