Results for conrad components data gateway usb uart compatible with c control
Conrad Components Data gateway USB , UART Compatible with: C-ControlConrad Components Data gateway USB, UART Compatible with: C-Control
Click For Info
B+B Thermo-Technik USB-Interface USB Interface Compatible with DM201 D, DM21 DB+B Thermo-Technik USB-Interface USB Interface Compatible with DM201 D, DM21 D
Click For Info
C-Control CPU C-Control PRO Mega 32 Compatible with: C-Control ProC-Control CPU C-Control PRO Mega 32 Compatible with: C-Control Pro
Click For Info
C-Control CPU C-Control PRO Mega 128 Compatible with: C-Control ProC-Control CPU C-Control PRO Mega 128 Compatible with: C-Control Pro
Click For Info
Gossen Metrawatt USB-PACK interface adapter for USB-connection Compatible with METRAHIT CALGossen Metrawatt USB-PACK interface adapter for USB-connection Compatible with METRAHIT CAL
Click For Info
C-Control SD card interface 197220 SPI Compatible with: C-ControlC-Control SD card interface 197220 SPI Compatible with: C-Control
Click For Info
Hacker X-Pro V2 USB interface Compatible with: X-Pro-Regler SerieHacker X-Pro V2 USB interface Compatible with: X-Pro-Regler Serie
Click For Info
C-Control Wireless receiver 198810 433MHz Compatible with: C-Control433 MHz AM HF interface supported directly from the operating system. Hard-wired with port 6 transmitter and port 7 receiver. This interface is compatible with many wireless radio switches on the...
Click For Info
C-Control Wireless transmitter 198874 433MHz Compatible with: C-Control433 MHz AM HF direct from the operating system supported interface. Hard-wired with port 3 transmitter and port 2 receiver. This interface is compatible with many wireless radio-switches on the...
Click For Info
C-Control Expansion C-Control PRO 32 Compatible with: C-Control ProThe C-Control Project Board is a convenient alternative to the evaluation board The C-Control Project Board PRO includes the major components needed to operate the C-PRO Control Unit. on the Project...
Click For Info
C-Control Expansion C-Control PRO 128 Compatible with: C-Control ProThe C-Control Project Board is a convenient alternative to the evaluation board The C-Control Project Board PRO includes the major components needed to operate the C-PRO Control Unit. on the Project...
Click For Info
C-Control Converter 198294 I²C, 1-Wire® Compatible with: C-ControlFor connection of Dallas Semiconductor 1-Wire components to a C-Control I unit over the I²C-Bus. The 1-Wire components can be optionally connected through a RJ12 socket (1-W, GND) or a 3pin multi...
Click For Info
Edimax Wireless N150 Nano USB Adapter - Compatible with Raspberry PiEW-7811Un is a nano USB wireless adapter that supports maximum range and speed. Despite the size, this tiny USB adapter supports higher data rate of up to 150Mbps when connecting with wireless...
Click For Info
C-Control DCF antenna 641146 Compatible with: C-ControlDCF 77 receiver components in a weather-proof case in accordance with IP54, can be used anywhere that DCF reception is not possible, e.g because of steel reinforced concrete, electrical interference...
Click For Info
C-Control Cable 198876 I²C Compatible with: C-ControlTo connect the Unit-M 2.0 with the RS232 and USB interface and programming adapters, and to join the I²C-Bus modules to each other and with the Unit M 2.0 or the Application Board.
Click For Info
Conrad Components 6-Channel LED Running Light with Motion Sensor ModuleIdeal attention grabber for advertisement (for example display windows). The LEDs can be individually separated and fastened with the attached adhesive tape. A light sensitive motion sensor sets off...
Click For Info
C-Control IR transceiver module 198860 Compatible with: C-ControlInfra-red interface, RC5 compatible, hard wired to port 3 (transmit) and port 2 (receive). Control directly from the operating system is supported. Passend zu: A · 2.0 · 1.2
Click For Info
C-Control Expansion C-Control PRO 32 Compatible with: C-Control ProThe module adapters are the interface of choice for the evaluation board, \"Mega 32\" Cat Item No: 19 82 45 and Mega 128 \"Order No.: 19 82 58 easy to expand. On the module adapter module, the...
Click For Info
C-Control Expansion C-Control PRO 128 Compatible with: C-Control ProThe module adapters are the interface of choice for the evaluation board, \"Mega 32\" Cat Item No: 19 82 45 and Mega 128 \"Order No.: 19 82 58 easy to expand. On the module adapter module, the...
Click For Info
C-Control Temperature sensor DS18S20 Compatible with: C-ControlTemperature sensor for C-Control I 2.0 1-Wire Bus. Temperature range: 55 â 100 ºC Anschlusskabel 2 m vergossen.
Click For Info
C-Control Software 198446 Compatible with: C-ControlWith the complete C-Control I software (all units), including all Basic examples, drivers, manuals, documentation etc.
Click For Info
C-Control LCD 198330 I²C Compatible with: C-ControlIn applications where a second display is needed, or the hardware environment does not permit a directly connected display, this display can be driven on the I²C-Bus. In addition, the display can...
Click For Info
C-Control Programming adapter 198834 RS232 Compatible with: C-ControlThis module can be used to program all C-Control I 2.0 units through the RS232 connection. If a jumper is used, programming with null modem or 1:1 cable is possible.
Click For Info
C-Control Faceplate adapter 198421 Compatible with: C-ControlFunctional and neutrally printed front plate made of 1.5mm thick anodised aluminium for mounting with the C-Control I installation set.
Click For Info
C-Control Diagnostics module 198228 Compatible with: C-ControlThis active module (2 oscillators, 1 monoflop) and a small Basic program allow you to check the function of all ports of your C-Control I M-Unit 2.0 (and 1.2 with Adapter) including IRQ, DA1, DA2,...
Click For Info
C-Control Expansion 198861 Compatible with: C-ControlTest board grid with 260 solder points for wiring your own applications. All the lines available on the BUS are labelled on both the mounting and soldering sides with the line names as used on the...
Click For Info
C-Control Relay module 198306 Compatible with: C-Control2 relays with a contact rating of 25 V/16 A, 2 x conv. connected with ports 5, 6. Suitable for: A · E · M · 2.0 · 1.2.
Click For Info
C-Control I/O module 198835 Compatible with: C-ControlInput/output module with 1 x 8-pin (DIL) switch and 8 LEDs for simulating operating states. For ports 1 to 8. Suitable to: A
Click For Info
C-Control Terminals 198811 Compatible with: C-ControlThis module provides terminals to connect your application with the outside world. Terminal connections to ports 1 to 16, AD1 to AD8, +5 V and GND are provided. Suitable for: A · E.
Click For Info
C-Control Expansion bus 191193 I²C Compatible with: C-ControlPassive 5x distributor for distribution of the I ² C bus, RXD and TXD signals and the +5 V and GND. The distributor can be mounted with its mounting holes on the LCD or LED display (including...
Click For Info
C-Control Driver 198280 I²C Compatible with: C-ControlThis module is an active pull-up module and ensures steep signal flanks on the bus line when the lines are long with high capacitive load. With the line driver module, the rise time is kept below 1...
Click For Info
Conrad Components Thermostat Variable Temperature Switch Kit With SensorOnce constructed, this kit can be used to switch on 230V appliances such as a heater, heatpipes or similar when a set temperature is undershot. A KTY 81-220 temperature sensor (thermistor) determines...
Click For Info
C-Control Expansion bus 198848 I²C Compatible with: C-ControlExpands your application by adding 8 more byte ports (PCF8574) via the I²C Bus. The expanded ports can also be directly addressed by the operating system. Up to 8 of these modules are supported....
Click For Info
C-Control Temperature sensor 198298 I²C Compatible with: C-ControlFor a precise measurement of temperature of different applications in the range of -55 to 125 °C . The accuracy of measurement amounts to ±1 °C and in the temperature range of 0 â 70...
Click For Info
C-Control Driver 198241 Compatible with: C-Control8 power drivers (2 W/24 V/DC, open collector) for I²C bus port expansion module (Order No. 19 88 48). For the expanded ports. This module is plugged into the port expansion module in piggyback...
Click For Info
Edimax Wireless N150 Nano USB Adapter - Compatible with Raspberry Pi.rm-cont h2, .rm-row h2{margin:0 0 10px}.u1, .u1-2{float:left}.rm-row{width:725px;overflow:hidden;padding:30px 0;border-bottom:1px solid #eee;clear:both;font-family:\"Helvetica Neue\", Helvetica,...
Click For Info
Lms Data 5 Port Hdmi Switch With Remote Control Black (c-hdmi51)Running out of spare HDMI ports on your TV? Need to connect an additional HDMI device such as a game console BluRay NAS or other device using the popular HDMI connector? The class-leading Dynamode...
Click For Info
Low power adapter Low power plug - USB 2.0 port Mini B 5 mm 2.1 mm Conrad Components 1 pc(s)Low power adapter Low power plug - USB 2.0 port Mini B 5 mm 2.1 mm Conrad Components 1 pc(s)
Click For Info
USB microscope Conrad Components 9 MPix Digital zoom (max.): 200 xUSB microscope Conrad Components 9 MPix Digital zoom (max.): 200 x
Click For Info
USB microscope Conrad Components 9 MPix Digital zoom (max.): 200 xUSB microscope Conrad Components 9 MPix Digital zoom (max.): 200 x
Click For Info







































