Results for conrad components data gateway usb uart compatible with c control
Conrad Components Data Gateway Usb , Uart Compatible With: C-control
Conrad Components Data Gateway Usb , Uart Compatible With: C-control: Conrad Components Data gateway USB, UART Compatible with: C-Control
B+b Thermo-technik Usb-interface Usb Interface Compatible With Dm...
B+b Thermo-technik Usb-interface Usb Interface Compatible With Dm201 D, Dm21 D: B+B Thermo-Technik USB-Interface USB Interface Compatible with DM201 D, DM21 D
C-control Cpu C-control Pro Mega 32 Compatible With: C-control Pro
C-control Cpu C-control Pro Mega 32 Compatible With: C-control Pro: C-Control CPU C-Control PRO Mega 32 Compatible with: C-Control Pro
C-control Cpu C-control Pro Mega 128 Compatible With: C-control Pro
C-control Cpu C-control Pro Mega 128 Compatible With: C-control Pro: C-Control CPU C-Control PRO Mega 128 Compatible with: C-Control Pro
Gossen Metrawatt Usb-pack Interface Adapter For Usb-connection Co...
Gossen Metrawatt Usb-pack Interface Adapter For Usb-connection Compatible With Metrahit Cal: Gossen Metrawatt USB-PACK interface adapter for USB-connection Compatible with METRAHIT CAL
C-control Sd Card Interface 197220 Spi Compatible With: C-control
C-control Sd Card Interface 197220 Spi Compatible With: C-control: C-Control SD card interface 197220 SPI Compatible with: C-Control
Hacker X-pro V2 Usb Interface Compatible With: X-pro-regler Serie
Hacker X-pro V2 Usb Interface Compatible With: X-pro-regler Serie: Hacker X-Pro V2 USB interface Compatible with: X-Pro-Regler Serie
C-control Wireless Receiver 198810 433mhz Compatible With: C-control
C-control Wireless Receiver 198810 433mhz Compatible With: C-control: 433 MHz AM HF interface supported directly from the operating system. Hard-wired with port 6 transmitter and port 7 receiver. This interface is compatible with many wireless radio switches on the market. It enables a number of remotely switchable sockets to be controlled from the C-Control. Ready-built with pluggable antenna. Suitable for: A · E · 2.0.
C-control Wireless Transmitter 198874 433mhz Compatible With: C-control
C-control Wireless Transmitter 198874 433mhz Compatible With: C-control: 433 MHz AM HF direct from the operating system supported interface. Hard-wired with port 3 transmitter and port 2 receiver. This interface is compatible with many wireless radio-switches on the market. It enables many remotely-switchable sockets to be controlled from the C-Control. Ready-built with pluggable antenna. Suitable for: A · E · 2.0
C-control Expansion C-control Pro 32 Compatible With: C-control Pro
C-control Expansion C-control Pro 32 Compatible With: C-control Pro: The C-Control Project Board is a convenient alternative to the evaluation board The C-Control Project Board PRO includes the major components needed to operate the C-PRO Control Unit. on the Project Board a voltage supply (USB / AC adapter), interface converter (RS232) and a large hole grid for their own developments. By default, the Project Board is designed for programming via RS232. Optionally, the RS232-USB Converter No. 19 72 57, the programming of the unit via USB can be done.
C-control Expansion C-control Pro 128 Compatible With: C-control Pro
C-control Expansion C-control Pro 128 Compatible With: C-control Pro: The C-Control Project Board is a convenient alternative to the evaluation board The C-Control Project Board PRO includes the major components needed to operate the C-PRO Control Unit. on the Project Board a voltage supply (USB / AC adapter), interface converter (RS232) and a large hole grid for their own developments. By default, the Project Board is designed for programming via RS232. Optionally, the RS232-USB Converter No. 19 72 57, the programming of the unit via USB can be done.
C-control Converter 198294 I²c, 1-wire® Compatible With: C-control
C-control Converter 198294 I²c, 1-wire® Compatible With: C-control: For connection of Dallas Semiconductor 1-Wire components to a C-Control I unit over the I²C-Bus. The 1-Wire components can be optionally connected through a RJ12 socket (1-W, GND) or a 3pin multi plug connection (1-W, GND). This module can be secured in the case by mounting angles, in the same way as for the programming and interface modules.
Edimax Wireless N150 Nano Usb Adapter - Compatible With Raspberry Pi
Edimax Wireless N150 Nano Usb Adapter - Compatible With Raspberry Pi: EW-7811Un is a nano USB wireless adapter that supports maximum range and speed. Despite the size, this tiny USB adapter supports higher data rate of up to 150Mbps when connecting with wireless 802.11n device which is 3 times faster than your normally 11g connection. You can just plug it into computer\'s USB port and enjoy incredible high-speed wireless network access. This is for sure the trendiest piece of upgrade you can make to your wireless network. Complies with wireless 802.11n...
C-control Dcf Antenna 641146 Compatible With: C-control
C-control Dcf Antenna 641146 Compatible With: C-control: DCF 77 receiver components in a weather-proof case in accordance with IP54, can be used anywhere that DCF reception is not possible, e.g because of steel reinforced concrete, electrical interference fields from machines and computers. The receiver unit can be turned through 360° and therefore permits optimum alignment.
C-control Cable 198876 I²c Compatible With: C-control
C-control Cable 198876 I²c Compatible With: C-control: To connect the Unit-M 2.0 with the RS232 and USB interface and programming adapters, and to join the I²C-Bus modules to each other and with the Unit M 2.0 or the Application Board.
Conrad Components 6-channel Led Running Light With Motion Sensor Module
Conrad Components 6-channel Led Running Light With Motion Sensor Module: Ideal attention grabber for advertisement (for example display windows). The LEDs can be individually separated and fastened with the attached adhesive tape. A light sensitive motion sensor sets off a sporadic sequence of running lights for approx. 15 seconds with 6 red LEDs.
C-control Ir Transceiver Module 198860 Compatible With: C-control
C-control Ir Transceiver Module 198860 Compatible With: C-control: Infra-red interface, RC5 compatible, hard wired to port 3 (transmit) and port 2 (receive). Control directly from the operating system is supported. Passend zu: A · 2.0 · 1.2
C-control Expansion C-control Pro 32 Compatible With: C-control Pro
C-control Expansion C-control Pro 32 Compatible With: C-control Pro: The module adapters are the interface of choice for the evaluation board, \"Mega 32\" Cat Item No: 19 82 45 and Mega 128 \"Order No.: 19 82 58 easy to expand. On the module adapter module, the extension of the C-Control I, which are designed as a 40-pin plug connectors are simply plugged into the adapter, as well as the I2C-bus unit modules of the C-Control I series.
C-control Expansion C-control Pro 128 Compatible With: C-control Pro
C-control Expansion C-control Pro 128 Compatible With: C-control Pro: The module adapters are the interface of choice for the evaluation board, \"Mega 32\" Cat Item No: 19 82 45 and Mega 128 \"Order No.: 19 82 58 easy to expand. On the module adapter module, the extension of the C-Control I, which are designed as a 40-pin plug connectors are simply plugged into the adapter, as well as the I2C-bus unit modules of the C-Control I series.
C-control Temperature Sensor Ds18s20 Compatible With: C-control
C-control Temperature Sensor Ds18s20 Compatible With: C-control: Temperature sensor for C-Control I 2.0 1-Wire Bus. Temperature range: 55 â 100 ºC Anschlusskabel 2 m vergossen.